Closegrain
(08) 9000 0260 Book a consult

Bassendean workshop · est. 2009

Custom kitchens & built‑in cabinetry, made in our Bassendean workshop

Kitchens, walk‑in robes, laundries and vanities — machined, edged and assembled here, then installed by the people who built them. Kitchens from $1,150/lm supplied and installed.

Book a design consult (08) 9000 0260

Not a flat‑pack reseller — we machine it here, and you're welcome to walk the floor.

Blum hinges and runners as standard — not where we save money.
Four to six weeks from signed drawings. A promised fortnight is someone else's corner being cut.

Cabinet Configurator

MAKER'S PLAN · LIVE $11,900

Project

Kitchen layout

Door finish

7.0 lm

Kitchen minimum 4 lm — that's the slider's floor, and ours.

L‑shape kitchen · 2‑pac poly

7.0 lm × $1,700/lm

$11,900 cabinetry, supplied + installed
+ Stone benchtop from $600/lm — benchtops are their own trade. We template and coordinate stone through our stonemason, quoted separately and honestly.

Layout changes the drawing and the design conversation — the metres change the price.

Since 2009Seventeen years of kitchens that still close properly.
Made in BassendeanMachined, edged and assembled in our own workshop.
$10M public liabilityInsured in your home and on our floor.
Blum hardware standardThe drawer you slam for twenty years isn't where we save money.

What we build, and what it honestly costs

Per‑linear‑metre rates are supplied and installed, from signed drawings. Benchtops are a separate trade — coordinated, never hidden in the number.

Custom kitchens — melamine

Full custom carcasses and doors in commercial melamine. Wears honest, prices honest, and the Blum hardware is the same as the dearest job on the floor.

from $1,150/lm

2‑pac poly kitchens

Sprayed two‑pack polyurethane doors in any colour you can name. Chips are repairable, the finish is furniture‑grade, and it's what the forever‑home usually picks.

from $1,700/lm

Timber veneer kitchens

Real timber faces on stable board. Ages the best of the three and costs it — we'll show you both truths on a sample door.

from $2,100/lm

Walk‑in robes

Drawer banks, shelf stacks and hanging in the ratio your actual wardrobe needs — priced by configuration, drawn at the consult.

from $2,400

Laundries

Tall storage, bench runs and a spot for the ugly stuff — which is all of it. Built to swallow the mess, sized to your trough and machines.

from $3,200

Vanities

Wall‑hung or floor‑standing, sealed for the wet room, drawers that clear the trap. Alfresco and entertainment units quoted on design — outdoor cabinetry is a materials conversation, honestly costed.

from $1,400

The workshop at 4pm

Low sun through the roller door, a run of 2‑pac doors curing in the spray room, a carcass square in the clamps. This is the part of your kitchen you never see — and it's the part that decides whether the doors still line up in 2040.

We're not a flat‑pack reseller. Board is machined, edged and assembled on this floor, by the people who'll stand in your kitchen at install. You're welcome to walk the floor before you sign anything.

Honest answer we give weekly: if your kitchen budget is under $8k, a flat‑pack with our install is the better spend — and we'll say so at the consult.

BASSENDEAN WA · MON–FRI 7:00–16:00 · SAT BY APPOINTMENT

What the last few clients said

★★★★★

"The island drawers close like the car door on something German. We picked the tile to match the kitchen, not the other way around."

M. & J. Harker · forever‑home kitchen, Bayswater
★★★★★

"The robe ended the floor pile. Drawer banks where we actually needed them, hanging where we didn't think we did. Drawn in front of us at the consult."

S. Okafor · walk‑in robe, Morley
★★★★★

"A laundry with a spot for the ugly stuff, which is all of it. Four weeks from drawings, installed in a day and a half, swept up after themselves."

R. Calloway · laundry, Guildford

Reviews are demonstration copy — this is a fictional business (see footer).

INDIAN OCEAN SWAN RIVER BassendeanWORKSHOP Ashfield Bayswater Morley Guildford Midland Maylands Inglewood Mount Lawley Belmont Perth CBD INSTALLS METRO-WIDE · CONSULTS AT THE WORKSHOP OR YOUR KITCHEN

Bassendean based, metro‑wide installs

The workshop's in Bassendean, so the eastern corridor sees us most — but a kitchen travels fine on a ute, and we install across the metro area.

  • Bassendean — workshop
  • Ashfield
  • Bayswater
  • Morley
  • Guildford
  • Midland
  • Maylands
  • Inglewood
  • Mount Lawley
  • Belmont
Check your suburb — book a consult

Questions we actually get asked

How much does a custom kitchen cost?+
Per linear metre of cabinetry, supplied and installed: melamine from $1,150/lm, 2‑pac poly from $1,700/lm, timber veneer from $2,100/lm, with a 4 lm minimum. A typical 7 lm L‑shape in 2‑pac lands around $11,900 in cabinetry. What moves it: drawer count (drawers cost more than doors), internal fit‑out, appliance housings, and tall pantry runs. Benchtops are separate — see below.
Custom or flat‑pack — honestly?+
Honest answer: if your budget is under $8k for a kitchen, a flat‑pack with our install is the better spend, and we'll say so at the consult. Custom earns its money when the room isn't square, the layout isn't standard, or you plan to keep the house — a custom carcass is built to your walls, not to a catalogue.
What about benchtops?+
Benchtops are their own trade. We template and coordinate stone from $600/lm through our stonemason — quoted separately, so you can see exactly what the cabinetry costs and exactly what the stone costs. Laminate tops we can supply with the cabinetry if the budget wants it.
How long does it take?+
Four to six weeks from signed drawings to install, most of the year. The sequence: consult and measure, drawings you sign off, machining and assembly in the workshop, spray time if it's 2‑pac, then install — usually one to two days on site. A promised fortnight is someone else's corner being cut.
Do you do just doors?+
Sometimes — and it's real value when it's right. If your carcasses are square, dry and the hinges hold a screw, re‑facing with new doors and hardware costs a fraction of a new kitchen. We check the carcasses before quoting; if they've had water, we'll tell you re‑facing is money down the drain.
Which finish lasts?+
Melamine wears honest — what you see at year one is what you get at year ten. 2‑pac chips can be repaired and resprayed, which is why it suits a forever home. Veneer ages best of the three and costs it. We keep sample doors of each in the workshop — come and slam them.

Book a design consult

Tell us what you're planning and we'd call you back within one business day to set a time — at the workshop, or at your kitchen with a tape measure. The consult and the drawings conversation are free; you only pay for cabinetry you commission.

PHONE  (08) 9000 0260 HOURS  MON–FRI 7:00–16:00 · SAT BY APPOINTMENT WORKSHOP  BASSENDEAN WA 6054

Please tell us your name.

A phone number so we can call you back.

Which suburb is the job in?

Pick the closest project type.

A sentence or two about the job helps us bring the right samples.

Demonstration form — nothing is sent anywhere.

This is a demonstration build by Sapience Analytics.

Want one pointed at your customers? We design and build conversion‑first sites for WA trades and SMEs — configurators, honest pricing, booking flows and all. danny@sapienceanalytics.com.au

sapienceanalytics.com.au
Call now Book a consult