LED lightbox fascias
from $850/lm600 mm deep, LED-lit, supplied and installed. Minimum 2 m run — a 2 m box is $1,700 on the wall.
Malaga workshop · Installs metro-wide
Shopfront signs, lightboxes & vehicle graphics — switched on across Perth.
Type your business name below and see it lit. We draw it, lodge the council permit, fabricate in our Malaga workshop and wire it through a licensed electrician — the cert comes with the invoice.
Since 2013
$10M public liability
Council permits lodged for you
Malaga workshop preview — first switch-on
DUSK · 17:12
Rendered exactly as typed, up to 24 characters — the way a fascia proof would be.
Sign type
Illumination — same sign, switched on or off
Lit is how the street sees you at 5pm in July.
LED lightbox fascia
4.0 m run × $850/lm
$3,400
600 mm deep, LED-lit, supplied & installed. Minimum run 2 m ($1,700).
Use this in my quoteDemonstration estimate — real quotes follow a measure & artwork check
What we make
Every sign your street sees
Printed ACM fascias
from $320/lmFull-colour print on aluminium composite — the unlit workhorse of every shopping strip.
3D acrylic letters
from $2,600A typical 6–8 letter halo-lit set. Letter count and height move it — we quote from your artwork.
Window vinyl
from $190/m²Cut or printed, installed on your glass. Minimum supply-and-install visit $380.
Double-sided A-frames
$290Standard size, pavement-ready. The hardest-working $290 on your street.
Ute & van graphics
from $680Doors plus tray sides. Your ute is a billboard you already own — sign it once, it works every day.
Full vehicle wraps
from $3,800Printed, laminated, wrapped panel by panel — colour change or full livery.
Since 2013Thirteen years of Perth shopfronts, strips and fleets.
$10M public liabilityCovered on your site, your wall and your verge.
Permits handledMost LGAs licence shopfront signs — we draw it, lodge it, and wait for the stamp before we cut anything.
Wired & test-taggedIlluminated signs are wired by a licensed electrician — the cert comes with the invoice.
Honest about WA sunPrinted vinyl fades honest at 5–7 years here; cut vinyl and acrylic go longer. We'll tell you which your artwork wants.
Switch-on stories
The moment the sign goes on
“We flicked the switch at six and I cried a bit, honestly. Three weeks from a serviette sketch to a lit fascia — and the council permit was their problem, not mine.”Demi K. — café owner, Mount Lawley
“The ute doors pay for themselves every school pickup. Two jobs straight off the oval car park this term, and the phone number reads from three cars back.”Shaun B. — electrician, Ballajura
“Three tenancies re-signed in one visit — one crew, one day, one invoice. The strip looks leased again, because it finally reads like it is.”Marcus V. — strip landlord, Dianella
Demonstration reviews — written as sample copy for this fictional business.
Where we work
Fabricated in Malaga. Installed metro-wide.
The workshop, the router and the print queue live in Malaga. The install crews don't — they run the whole metro, from Joondalup strips to Fremantle corners, with the CBD and the trade corridors in between.
Malaga — workshop
Wangara
Joondalup
Balcatta
Morley
Osborne Park
Ellenbrook
Midland
Perth CBD
Victoria Park
Cannington
Fremantle
Straight answers
What owners ask us
How much is a shopfront sign?
Lightbox fascias are priced by the metre — from $850/lm, 600 mm deep, installed, minimum 2 m ($1,700). A typical 4 m café fascia lands at $3,400. Printed ACM runs from $320/lm if you don't need it lit, halo-lit acrylic letter sets start around $2,600, and window vinyl is from $190/m² installed. What moves the number: length, illumination, letter count, and how hard your wall fights the installer.
Do I need council approval?
Usually, yes. Most Perth LGAs licence shopfront signage — size, projection and illumination all trigger the rules, and every council's schedule reads a little differently. We draw the sign, lodge the permit and wait for the stamp before we cut anything. The shire's timeline is the honest lead time, and we'll tell you what your council typically takes.
How long from artwork to install?
Fabrication is usually five to ten working days once artwork is approved — the permit almost always takes longer than the build. A realistic shopfront timeline: artwork settled in week one, the permit in the council's hands for two to five weeks, then we fabricate and install the week after the stamp arrives.
Can you match my brand colours?
Close on vinyl, exact on paint. Printed and cut vinyl live inside the film maker's gamut, so a hot fluoro or a very specific corporate colour can land near rather than on. Painted and acrylic finishes we can mix to the swatch. Either way, you see the physical swatch and sign off before we print.
What lasts longest in WA sun?
Acrylic letters and cut vinyl are the long-haulers — a decade is normal. Printed-and-laminated vinyl fades honest at five to seven years here; unlaminated print goes chalky faster and we'd rather not sell it to a west-facing wall. We'll tell you which materials your artwork and your aspect actually want.
Do you design, or just make?
Both. Bring finished artwork and we'll fabricate it faithfully — or bring a logo, a colour and a serviette sketch, and our designer will draw the sign, show you the proof at real scale, and only cut once you're happy.
Get a quote
Tell us what the street should read
Send the job through and we'd call you back within one business day — artwork check, measure, permit path and a fixed price.
1We call, talk artwork and measure the site.
2You approve a real-scale proof and a fixed quote.
3We lodge the permit, fabricate, install and switch it on.
Thanks — received.
We'd call you back within one business day to talk artwork, measure the site and map the permit path. Nothing was actually sent — this is a demonstration page; on the real build this enquiry would land straight in the shop's job queue.